Syringe filters, labeled, CHROMAFIL Xtra PTFE, 25 mm, 1 μm
Inside the syringe filter polytetrafluoroethylene is used as membrane material. The hydrophobic PTFE membrane is very resistant towards all kinds of solvents as well as acids and bases. Flushing with alcohol, followed by water, makes the originally hydrophobic membrane more hydrophilic. Labeled for method validation and certification. All CHROMAFIL filters are autoclavable (121 °C and 1.1 bar for 30 min)!
| Hazardous material | No |
| Method | Filtration |
| Brand | CHROMAFIL Xtra |
| Type | Syringe filter, labeled |
| Housing type | Wheel-like shaped housing |
| Hardware | Polypropylene (PP) housing with filter membrane |
| Membrane type | Polytetrafluoroethylene (PTFE) |
| Membrane properties | Hydrophobic |
| Membrane diameter | 25 mm |
| Membrane pore size | 1 μm |
| Code type | Labeled |
| Color code (top) | Labeled |
| Color code (bottom) | Colorless |
| Inlet | Luer lock (top) |
| Outlet | Luer tip (bottom) |
| Sample volume | 5-100 mL |
| Recommended application(s) | Nonpolar samples, Suitable for HPLC columns packed with particles > 3 μm, GC, SFC, …, Very resistant towards all kinds of solvents as well as acids and bases |
| Sterile | No |
| Binding capacity (proteins) | Moderate–high |
| Dead volume | 80 μL |
| Filtration area | 4.91 cm2 |
| Storage temperature | RT |
If you would like to learn more technical parameters and applications about Syringe filters, labeled, CHROMAFIL Xtra PTFE, 25 mm, 1 μm please contact us online or leave a message.
Please kindly contact us through Tel: +86 (0) 21/3352 2300 for more information.
