Syringe filter, labeled, CHROMAFIL Xtra PTFE, 0.45 μm
Inside the syringe filter polytetrafluoroethylene is used as membrane material. The hydrophobic PTFE membrane is very resistant towards all kinds of solvents as well as acids and bases. Flushing with alcohol, followed by water, makes the originally hydrophobic membrane more hydrophilic. Labeled for method validation and certification. All CHROMAFIL filters are autoclavable (121 °C and 1.1 bar for 30 min)!
| Method | Filtration |
| Brand | CHROMAFIL Xtra |
| Type | Syringe filter, labeled |
| Housing type | Wheel-like shaped housing |
| Hardware | Polypropylene (PP) housing with filter membrane |
| Membrane type | Polytetrafluoroethylene (PTFE) |
| Membrane properties | Hydrophobic |
| Filter type | 13 mm |
| Effective membrane diameter* | 15.6 mm |
| Membrane pore size | 0.45 μm |
| Code type | Labeled |
| Color code (top) | Labeled |
| Color code (bottom) | Colorless |
| Inlet | Luer lock (top) |
| Outlet | Luer tip (bottom) |
| Sample volume | 1 ≤ 5 mL |
| Recommended application(s) | Nonpolar samples, Suitable for HPLC columns packed with particles > 3 μm, GC, SFC, …, Very resistant towards all kinds of solvents as well as acids and bases |
| Sterile | No |
| Binding capacity (proteins) | Moderate–high |
| Dead volume | 30 μL |
| Effective filtration area* | 1.9 cm2 |
| Storage temperature | 15–25 °C / 59–77 °F |
| Packaging dimensions | 110 x 110 x 105 mm / 4.33 x 4.33 x 4.13 Inch |
| Gross weight (incl. packaging) | 206 g / 0.45 lbs |
| Hazardous material | No |
| Remark | *Standardized measurement since Mai 2023. The product has not been modified. |
If you would like to learn more technical parameters and applications about Syringe filter, labeled, CHROMAFIL Xtra PTFE, 0.45 μm please contact us online or leave a message.
Please kindly contact us through Tel: +86 (0) 21/3352 2300 for more information.
