Syringe filters, labeled, CHROMAFIL Xtra H-PTFE, 13 mm, 0.45 μm
Inside the syringe filter a hydrophilized polytetrafluoroethylene is used as membrane material. The H-PTFE membrane is hydrophobic with additional hydrophilic characteristic . This product is very resistant towards all kinds of solvents as well as acids and bases. Labeled for method validation and certification. All CHROMAFIL filters are autoclavable (121 °C and 1.1 bar for 30 min)!
| Hazardous material | No |
| Method | Filtration |
| Brand | CHROMAFIL Xtra |
| Type | Syringe filter, labeled |
| Housing type | Wheel-like shaped housing |
| Hardware | Polypropylene (PP) housing with filter membrane |
| Membrane type | Hydrophilized polytetrafluoroethylene (H-PTFE) |
| Membrane properties | Hydrophilic |
| Membrane diameter | 13 mm |
| Membrane pore size | 0.45 μm |
| Code type | Labeled |
| Color code (top) | Labeled |
| Color code (bottom) | Colorless |
| Inlet | Luer lock (top) |
| Outlet | Luer tip (bottom) |
| Sample volume | 1 ≤ 5 mL |
| Recommended application(s) | Polar and nonpolar solutions, Resistant towards all kinds of solvents as well as acids and bases, Suitable for HPLC columns packed with particles > 3 μm, GC, SFC |
| Sterile | No |
| Binding capacity (proteins) | Moderate–high |
| Dead volume | 30 μL |
| Filtration area | 1.33 cm2 |
| Storage temperature | RT |
If you would like to learn more technical parameters and applications about Syringe filters, labeled, CHROMAFIL Xtra H-PTFE, 13 mm, 0.45 μm please contact us online or leave a message.
Please kindly contact us through Tel: +86 (0) 21/3352 2300 for more information.
