Syringe filters, labeled, CHROMAFIL Xtra PET, 13 mm, 0.45 μm
Inside the syringe filter polyester (polyethylene terephthalate) is used as membrane material. The hydrophilic multipurpose PET membrane is suitable for polar as well as nonpolar solvents. It is the HPLC filter, especially suited for mixtures of water and organic solvents. It is not cytotoxic, does not inhibit the growth of microorganisms and higher cells. Labeled for method validation and certification. All CHROMAFIL filters are autoclavable (121 °C and 1.1 bar for 30 min)!
| Hazardous material | No |
| Method | Filtration |
| Brand | CHROMAFIL Xtra |
| Type | Syringe filter, labeled |
| Housing type | Wheel-like shaped housing |
| Hardware | Polypropylene (PP) housing with filter membrane |
| Membrane type | Polyester (PET) |
| Membrane properties | Hydrophilic |
| Membrane diameter | 13 mm |
| Membrane pore size | 0.45 μm |
| Code type | Labeled |
| Color code (top) | Labeled |
| Color code (bottom) | Colorless |
| Inlet | Luer lock (top) |
| Outlet | Luer tip (bottom) |
| Sample volume | 1 ≤ 5 mL |
| Recommended application(s) | General purpose HPLC columns packed with particles > 3 μm, GC, SFC, HPLC, especially suited for mixtures (mid-polar) of water and organic solvents, Suitable for aqueous, polar, hydrophilic as well as nonpolar, organic, hydrophobic solvents/samples with low particle-load, TOC/DOC (ppm) determinations |
| Sterile | No |
| Binding capacity (proteins) | Moderate |
| Dead volume | 30 μL |
| Filtration area | 1.33 cm2 |
| Storage temperature | RT |
If you would like to learn more technical parameters and applications about Syringe filters, labeled, CHROMAFIL Xtra PET, 13 mm, 0.45 μm please contact us online or leave a message.
Please kindly contact us through Tel: +86 (0) 21/3352 2300 for more information.
